Free Model Boat/ Hydroplane Plans
Below you will find plans for a number of FE hydroplane projects. These plans are all copyrighted by Garry Finlay. They may not be reproduced for sale or other ditribution except with the express permission Of Mr Finlay. The drawing presented here are only for personal use, to support you in building the model.Garry has spent many hours producing these plans, if you want him to continue then - please provide hime and his plans with the respect they are due.
|
1/16th |
1/14th |
1/13th |
1/12th |
1/10th |
1/8th | |
Oh Boy ObertoDave Franks Oh Boy Oberto |
Sheet ![]() Sheet2 | |||||
Atlas Van LinesLucero 28.5ft low profile Picklefork
You can find a CNC cut kit for this at 1/16th scale in our shop |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 |
![]() Instructions ![]() Sheet 1 |
![]() Sheet 1 ![]() Sheet 2 ![]() Sheet 3 |
NB: 60 inch sheets ![]() Sheet 1 ![]() Sheet 2 | ||
Pay 'n Pak28.5 ft Ted Jones Pickle Fork
Please not the left hand image is NOT the correct picture for the boat but is the same lower hull. The plan is for the turbine version. The boat described in the plans is the final version of this boat. In the original the tunnel was streaight across the boat. On the first run the boat somersaulted and was damaged. It was rebuilt but this time with the extended central nose. This nose actually provided a central mounting for two small wings either side of it . The wing angle count be controlled from the cockpit in order to give it some stability control. Whilst racing in Seattle? another boat was flung in front of PaynPak which ran over it and flipped. Here is a build article for the kit from this plan You can get decals from here You can find a CNC cut kit for this at 1/12th scale in our shop |
![]() Sheet 1 ![]() Sheet 2 ![]() Sheet 3 |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 |
![]() Sheet 1 ![]() Sheet 2 ![]() Sheet 3 |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 ![]() Sheet 3 ![]() Sheet 4 ![]() Sheet 5 | ||
Classic Round Nose1958 Ted Jones Classic
You can find a CNC cut kit for this at 1/16th scale in our shop and If you mail the owner of this website you can obtain a PDF of the decals at 1/10th size (which you or he can scale) |
![]() Instructions ![]() Sheet 1 |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 ![]() Sheet 3 |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 ![]() Sheet 3 | |||
Thriftway TooJones 34ft caboverconventional roundnose
|
Actual 1:13.3 25.5 inches Suit US O sport ![]() Sheet 1 ![]() Sheet 2 | |||||
Notre Dame30ft Karelson Low Profile
|
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 |
NB Actually 1:1.11 27 inches Suits US LSH Class ![]() Instructions ![]() Sheet 1 ![]() Sheet 2 |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 |
![]() Instructions ![]() Sheet 1 ![]() Sheet 2 | ||
Baby BootleggerNo Picture Available |
![]() Instructions ![]() Sheet 1 Instructions Sheet 2
|
Models and Electronics

Over 10% of all our visitors now use