AsTec is a small business ,it was set up in order to provide modellers with quality electronic products (specifications equal to or exceeding most other available equipment) at a reasonable price, we have been trading since 1995. Originally we made and sold our own electronic products but as you will see our range has grown somewhat!! Enclosed is information on our current products. If you have any questions please give us a call (0900 - 2000) and we will do all we can to assist you. We only use the highest quality double thickness masked and pre-tinned PCB's. All the FET's quoted are individually rated at 75 amps (240 pulsed). The ratings shown are true capability ratings determined from long testing and experience.

Please print the order form from the site and fill it in either as reference or to send to us as an order.

You can contact us .....
By Email
Please use our contact us
By surface mail tol:
Astec
6 Stickland
Clevedon
North Somerset
BS21 5EX

By Telephone
+44 (0) 1275 543471,
Usually Ansaphone,
please leave a message and we will call back.
If you wish to talk directly
then try between 1900 and 2100 local time

Accesories



2mmrod
for model boats, 2mmrod A 6 inch servo actuator rod threaded 2mm at one end and plain at the other. Fits swinging keeper, ball link etc 2

Price GBP 0.10 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.55 extra item 0.05, Elsewhere UKP 0.55 extra item 0.05
balllink
for model boats, balllink A 2mm knuckle joint type ball link connector for use at either end, or as intermediate connectors, in the servo actuator links

Price GBP 0.35 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item .05, EU UKP 0.55 extra item .05, Elsewhere UKP 0.5 extra item ..05
balllink2
for model boats, balllink2 A ball type connector and link, comes complete with screw and nut

Price GBP 0.45 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.55 extra item 0.05, Elsewhere UKP 0.55 extra item 0.05
bbarscu
for model boats, bbarscu Deans pure silver plated copper battery bars for creating parallel battery packs.

Price GBP 0.45 Postage: base cost /additional item GBP  
Postage: UK UKP 0.5 extra item 0.01, EU UKP 0.55 extra item 0.01, Elsewhere UKP 0.6 extra item 0.01
bodyclip
for model boats, bodyclip A body clips as used on our riggers

2 types available

1 single clip pack Price UKP 0.25
10 10 clip pack Price UKP 1.20
Postage: base cost /additional item GBP  
Postage: UK UKP 0.51 extra item 0.01, EU UKP 0.51 extra item 0.01, Elsewhere UKP 0.51 extra item 0.01
Build
for model boats, Build We have the services of an experienced FE boat builder available. If you are not able or do not have the time to dop your own build we can help. Please contact us to discus your needs and requirements. Prices on application

Price GBP POA Postage: base cost /additional item GBP  
Postage: UK UKP 0 extra item , EU UKP 0 extra item , Elsewhere UKP 0 extra item
cells
for model boats, cells We can supply a range of cells to order - please check with us first here

Price GBP 0 Postage: base cost /additional item GBP  
Postage: UK UKP 0 extra item 0, EU UKP 0 extra item 0, Elsewhere UKP 0 extra item 0
cellwrap
for model boats, cellwrap 68mm Clear heat shrink layflat tube for cell packs. the right size for side to side stick packs or zigzag packs made with battery bars.

Price GBP 1.80 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.65 extra item 0.05, Elsewhere UKP 0.88 extra item 0.08
connector
for model boats, connector 2,3.5,4mm and 5.5mm gold plated power connector 1 male 1 female

gold plated tube type compression connector having a rating of up to 150 amps, 3.5mm and 5mm connector are of the "stumpy" variety particularly suited to brushless applications

4 types available

2mmgoldpl 2mm gold plated Price UKP 1.30
3.5mmgoldpl 3.5mm gold plated Price UKP 1.45
4mmgoldpl 4mm gold plated Price UKP 1.60
5mm 5mm Price UKP 2.10
Postage: base cost /additional item GBP  
Postage: UK UKP 0.32 extra item 0.02, EU UKP 0.33 extra item 0.03, Elsewhere UKP 0.35 extra item 0.05
etti-cool
for model boats, etti-cool A choice of coolers for 380/540 size feigao type motors, from ETTI . The coolers comprise an acrylic tube, sealing rings and water nipples. Two 4mm holes have to be drilled to take the water nipples but this allows you to customise the installation to suit you.

3 types available

380L 380L - 45mm long Price UKP 8.20
540L 540L - 45mm long Price UKP 8.50
540S 540S - 35mm long Price UKP 8.30
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 1.8 extra item 0.20
etti-fhex
for model boats, etti-fhex A choice of flex hex couplings for differing cable sizes and motors, from ETTI.

5 types available

1/8-130 1/8th-130 Price UKP 7.50
1/8-2 1/8th- 2mm Price UKP 7.50
3.18/1.2 3.18 - 1.2mm (eco) Price UKP 7.50
5/130 5mm-0.130 in Price UKP 7.50
5/150 5mm-0.150 inch Price UKP 7.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 1.8 extra item 0.20
etti-mtrmnt
for model boats, etti-mtrmnt A choice of motor mounts to suit 380/540 size motors (B/L or std) from ETTI. 380 size is shown, 540 size is annodised blue. Out-runner mount has integral plate based water cooling. mounts have fibreglass side panels

3 types available

380 380 Price UKP 14.00
380out 380 outrunner Price UKP 11.00
540 540 Price UKP 15.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 1.8 extra item 0.20
etti-trim
for model boats, etti-trim ETTI Trim tabs. Two styles available

light trim tabs (pictured size 51mm wide 31mm deep suit mono 1 /mono 2. Mount bolts to transom and adjustment screws are in the mount. Tab is slotted for vertical adjustment and fits between mount and transom.

micro tabs 31mm wide tapering to 22mm, 41mm deep suit boats 400-600mm. Bolted to transom - bolt goes into a threaded post which acts as an adjuster. small screws for secondary fixing.

2 types available

medium medium Price UKP 12.00
small Small Price UKP 10.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.8 extra item 0.60, Elsewhere UKP 2.3 extra item 0.80
fan80-12
for model boats, fan80-12 Cells should be cooled before charging and kept cool whilst charging. In the case of NiMh cells this is a requirement and an explosion can result if you do not ensure that the cells stay cool (overheated cells vent hydrogen!!)

Here is a low cost 80mm square fan that runs on 12v DC. Ideal for cooling packs whilst charging - either in the boat or mounted in a purpose built tunnel.

Price GBP 4.50 Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 0.50, EU UKP 2.2 extra item 0.70, Elsewhere UKP 2.5 extra item 1.00
Fastners
for model boats, Fastners A range of Stainless Steel fastners suitable for the model boater. Screws are caphead with Allen sockets. Nuts are Standard full nuts.

10 types available

m2.5x6ss m2.5 x 6mm long stainless Price UKP 0.12
m3nutss m3 Stainless hex nut Price UKP 0.05
m3nutssny m3 stainless hex nyloc nut Price UKP 0.08
m3x10ss m3 x 10mm stainless Price UKP 0.08
m3x12ss m3x12ss Price UKP 0.09
m3x8ss m3x8 stainless Price UKP 0.08
m4 12mm m4x12ss Price UKP 0.10
m4nutss m4 stainless hex nut Price UKP 0.08
m4nutssny m4 stainless hex nyloc nut Price UKP 0.09
m4x10ss m4 x 10mm long stainless Price UKP 0.09
Postage: base cost /additional item GBP  
Postage: UK UKP 0.29 extra item 0.01, EU UKP 0.31 extra item 0.01, Elsewhere UKP 0.51 extra item 0.01
fullsrudarm
for model boats, fullsrudarm Fullers solid aluminium Rudder arm. Machined from a solid block of Aluminium with a 3/16 inch hole for the rudder stock

Price GBP 7.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.6 extra item 0.10, EU UKP 0.62 extra item 0.12, Elsewhere UKP 0.75 extra item 0.15
g1147.20
for model boats, g1147.20 The MINI gearbox comprise a gearbox case, and a pair of 2:1 gearwheels (can be interchanged, if desired), an intermediate ring (required for installations using the electric motor MABUCHI RE-140) and a cover.

Price GBP 7.50 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.8 extra item 0.60, Elsewhere UKP 2.8 extra item 1.00
g1427
for model boats, g1427 Graupner low profile water pickups in two sizes.
13mm spacing4.2mm ID 7mm OD tubes
10mm spacing 3mm ID 5.5mm OD tubes.

2 types available

.0 13mm spacing Price UKP 3.00
.1 10mm spacing Price UKP 2.90
Postage: base cost /additional item GBP  
Postage: UK UKP 1.05 extra item 0.05, EU UKP 1.17 extra item 0.07, Elsewhere UKP 1.3 extra item 0.10
G1981
for model boats, G1981 Nickel plated brass shafts as used in Graupner race boats.

1981.8 eco manta 4mm dia shaft 202 mm long (including flexible coupling end. Outer is 6mm dia 175 mm long and has a brass bearing bushing)

1981.2 4mm dia shaft with ballraces 262mm long 10mm dia has short flexi on inboard end

1981.3 4mm dia shaft with ball races 270mm long - solid shaft

3 types available

.1 .1 202mm for e.g.eco manta Price UKP 9.00
.2 .2 262 long 10dia ball bearing flex end Price UKP 21.00
.3 .3 27 long 10 dia ball bearings solid M4 shaft Price UKP 18.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.15 extra item 0.15, EU UKP 1.4 extra item 0.20, Elsewhere UKP 1.8 extra item 0.30
G2319
for model boats, G2319 Graupner 3/16" dog drive

Price GBP 4.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.9 extra item 0.05, EU UKP 1 extra item 0.05, Elsewhere UKP 1.15 extra item 0.10
g2320
for model boats, g2320 Graupner 4mm - 4mm to 3/16 tailnut and adapter - for use with G2321 dog drive adapter

Price GBP 1.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.55 extra item 0.05, Elsewhere UKP 0.8 extra item 0.10
g2321
for model boats, g2321 Graupner dog drive adapter 4mm threaded used in conjunction with a spacer or tailnut spacer combined (g2320) to drive dog drive props . e.g. graupner 2317 series or Octura 3/16 dog props.

Price GBP 1.55 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.55 extra item 0.05, Elsewhere UKP 0.8 extra item 0.10
g2323
for model boats, g2323 Graupner glass filled turn fin

Price GBP 3.35 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.30, EU UKP 1.7 extra item 0.40, Elsewhere UKP 2 extra item 0.50
g2363
for model boats, g2363 Graupner glass filled rudder system ideal for most boats

Price GBP 11.6 Postage: base cost /additional item GBP  
Postage: UK UKP 1.7 extra item 0.20, EU UKP 1.9 extra item 0.30, Elsewhere UKP 2.1 extra item 0.40
g2364
for model boats, g2364 A choics of two Aluminium Rudders with integral brackets. Small (2364.1) is suitable for 7-12 cell Large (2364.2) will suit 20 + cell models

Small is 92mm long, max width 25mm, 45mm from transom to pivot
Large is 120mm long 28mm wide, 73mm from transom to pivot
Small rudder tapers slightly , large rudder is straight.

2 types available

.1 .1 Small Price UKP 16.00
.2 .2 Price UKP 22.60
Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 0.50, EU UKP 2.3 extra item 0.60, Elsewhere UKP 2.5 extra item 0.60
G2374
for model boats, G2374 Adapter plate to allow 700 motors to be mounted in a 600 mounting. If you want a 600 to 700 then please ask and we will modify this mount.

Price GBP 11.70 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2 extra item 0.80
g2378
for model boats, g2378 A CNC cut Aluminium motor mount in two parts suitable for 500/600/700 motors. The nose has a CNC cut hole suitable for taking a shaft, there is a pre-tapped to take a retaining screw (not supplied). The base is chamfered to more easily fit the bottom of a hull and having long slots to allow a small amount of vertical adjustment.

2 types available

1 540/600 Price UKP 7.50
2 for 700 Price UKP 8.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2 extra item 0.80
G332
for model boats, G332 An Aluminium tube cooling coil suitable for cooling motors.

3 types available

4 540 motors Price UKP 5.00
5 700 motors Price UKP 5.00
5.1 400/480 motors Price UKP 4.60
Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item .10, EU UKP 1.1 extra item .10, Elsewhere UKP 1.6 extra item .10
g3326
for model boats, g3326 A machined aluminium shaped motor watercooling jacket in 4 sizes.

4 types available

.1 35.8mm e.g. for inline 500 and 600, std 540 Price UKP 8.35
.2 44.5mm eg for speed 700 neo Price UKP 8.35
.3 48mm e.g for bb820 turbo race Price UKP 8.35
.4 37.5 mm e.g for speed 600 race Price UKP 8.35
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2 extra item 0.50
g3329
for model boats, g3329 A flat water cooling plate for speed controllers. approx 40mm x 25mm x 5mm. constructed from a solid Aluminium plate that is drilled and cross drilled. longitudinal holes have connecting tubes and the cross hole is plugged.

Price GBP 5.05 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.30, EU UKP 1.8 extra item 0.40, Elsewhere UKP 2 extra item 0.40
g377
for model boats, g377 Graupner 12mmx5mm(id) x 4mm (thick) thrust bearing having two hardened steel tracks and a caged ball race. Suitable for use with 5mm dia shafts (e.g. bb700, Mega, Fegao etc)

2 types available

4 4mm Price UKP 5.00
5 5 mm Price UKP 5.00
Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.58 extra item 0.08, Elsewhere UKP 0.7 extra item 0.10
G414
for model boats, G414 2mm prop shaft. Sahft is 140 mm long with 2mm dia, 2mm threda and 2mm lock nut. nickel plated brass tube is 120mm long by 4mm dia and has two brass bearings and a lube hole near the inboard end

Price GBP 2.70 Postage: base cost /additional item GBP  
Postage: UK UKP 1.2 extra item 0.20, EU UKP 1.2 extra item 0.20, Elsewhere UKP 2 extra item 0.50
G416
for model boats, G416 Graupner 2mm prop shaft. Prop shaft is 180mm long 2mm dia with 2mm thread at one end and supplied with retaining nut. Propshaft outer is nickel plated brass, 160mm long 4 mm outside diameter, with pressed brass bearings and with an oiler hole near the inboard end.

Price GBP 3.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.2 extra item 0.20, EU UKP 1.2 extra item 0.20, Elsewhere UKP 1.5 extra item 0.50
g531.19
for model boats, g531.19 Graupner heavy duty water resistant PVC tape for sealing your race boat

Price GBP 1.90 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.30, EU UKP 1.8 extra item 0.50, Elsewhere UKP 2 extra item 0.50
G914
for model boats, G914 Small but powerful water pump for e.g. fire-fighting monitors aboard smaller model ships. The pump has to be installed in the model below the waterline. The vertically arranged water scoop may be run directly through the bottom of the hull.

Price GBP 16.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 1.00, EU UKP 2.4 extra item 1.20, Elsewhere UKP 3.5 extra item 1.50
grudders
for model boats, grudders Graupner glass filled rudders for race boats. All are mounted to the transom by screws and have blades that will twist out if hit. There are 4 types
2332 60mmx40mm for 400's (left)
2332 70mmx45mm for mono1/hydro1(left)
2322 88mmx48mm for hydro 1/2 etc (right)
2326 90mmx50 for hydro2/3 mono2/3 (middle) 2

4 types available

g2322 90x50 Price UKP 11.50
g2326 88x48 Price UKP 11.50
g2332 60x40 Price UKP 10.50
g2332.1 70x45 Price UKP 10.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.25 extra item 0.25, EU UKP 1.5 extra item 0.25, Elsewhere UKP 1.75 extra item 0.25
GTX
for model boats, GTX Graupner GTX500/650 and 800 outboard units. The 500 and 650 are supplied without the motor. The 800 unit is supplied with an 800 race motor. The units consists of a strut leg (glass filed plastic for 500/650 and metal for the 800) with bearings and flex drive (500/650, 800 is gear driven) and motor coupling. The GTX 500 has an adapter for 480 motor.

3 types available

G2337 800 Price UKP 108.00
G2370.2 GTX650 without motor Price UKP 35.00
G2371.2 GTX500 without motor Price UKP 25.00
Postage: base cost /additional item GBP  
Postage: UK UKP 3.5 extra item 2.50, EU UKP 4 extra item 3.00, Elsewhere UKP 5 extra item 3.50
guncool
for model boats, guncool A motor water silicon cooling jacket set

A superior motor water cooling method that allows water to run adjacent to the motor surface with a large contact area. Includes heat shrink (for sealing motor) water jacket, silicon tube, inlet/outlet port and couplers.,

5 types available

4194 for 400/480 motors 20mm long 30-40mm dia Price UKP 9.50
4196 for 540/600 motors 20mm long 35-45mm dia Price UKP 10.00
4197 for 600 motors 30mm long 35-45mm dia Price UKP 11.50
4198 for 700 motors 30mm long 45-60mm dia Price UKP 13.00
4199 for 8/900 motors 40mm long 50-70mm dia Price UKP 12.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.5 extra item 0.50, Elsewhere UKP 2 extra item 0.50
H&M_aerial
for model boats, H&M_aerial Coiled spring race aerial with solder tag. NB receiver aerial must be shortened to the given aerial length in order to function properly.

8 types available

20bl 20 cm Black Price UKP 5.00
20re 20 cm Red Price UKP 5.00
20wh 20 cm white Price UKP 5.00
20ye 20 cm Yellow Price UKP 5.00
30bl 30 cm black Price UKP 5.00
30re 30 cm Red Price UKP 5.00
30wh 30 cm white Price UKP 5.00
30ye 30 cm Yellow Price UKP 5.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 2 extra item 0.20
IB3800
for model boats, IB3800 IB 3800 cell packs, pushed and matched

2 types available

12 12 cells Price UKP 66.00
7 7 cell pack Price UKP 38.5
Postage: base cost /additional item GBP  
Postage: UK UKP 7 extra item 3.00, EU UKP 9 extra item 4.00, Elsewhere UKP 12 extra item 6.00
ib4200
for model boats, ib4200 Pushed and matched sets of IB4200SHV cells

2 types available

-12 12 cell pack Price UKP 70.00
-7 7 cell pack Price UKP 45.00
Postage: base cost /additional item GBP  
Postage: UK UKP 6 extra item 2.00, EU UKP 7 extra item 2.5, Elsewhere UKP 10 extra item 4.00
jav-mnt
for model boats, jav-mnt A choice of two sized motor mounts suitable for 540/545/600 style motors or 380/385/400 style motors.

2 types available

380 380/385/400 Price UKP 1.70
540 540/545/600 Price UKP 1.90
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.20, EU UKP 1.6 extra item 0.30, Elsewhere UKP 2 extra item 0.50
ltb
for model boats, ltb Lead Teflon replacement bearings in 2mm short, 2mm long, 1/8", 4mm and 3/16"

5 types available

1/8 lead teflon bearing 1/8 Price UKP 0.90
2l lead teflon bearing 2mm long Price UKP 0.80
2s lead teflon bearing 2mm short Price UKP 0.55
3/16 lead teflon bearing 3/16 Price UKP 1.10
ltb4 lead teflon bearing 4mm Price UKP 0.95
Postage: base cost /additional item GBP  
Postage: UK UKP 0.51 extra item 0.01, EU UKP 0.56 extra item 0.01, Elsewhere UKP 0.61 extra item 0.01
mega-acculine
for model boats, mega-acculine The Mega Acculine is a magnetic soldering jig. It was designed primarily for sub c cells but will work quite happily with other shapes and sizes. It has several strong magnets to hold the cells in place whilst the soldering operation is performed. The magnets are strong enough to hold a stack of cells extending past the top. The jig is supplied with full instructions. This is the ji that we use when making up in-line soldered packs.

Price GBP 10.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.40, EU UKP 1.7 extra item 0.50, Elsewhere UKP 2.1 extra item 0.60
mega_magbal
for model boats, mega_magbal A low cost but effective magnetic balancer. Aluminium frame, sprung steel foot, Aluminium adjuster, high polished hard magnets, steel hard point with accurately machined plastic mandrels.

Suitable for boat and aero props. Now with Aluminium cones

Price GBP 15.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 0.50, EU UKP 2.6 extra item 0.60, Elsewhere UKP 3.5 extra item 1.00
minikeeper
for model boats, minikeeper A small locking mechanism for the end of a servo link. The minikeeper fits over (either side of) the attachment point. The bent metal linkage is inserted through the keeper and attachment point and the keeper swing over the rod wher it locks in place.

Price GBP 0.10 Postage: base cost /additional item GBP  
Postage: UK UKP 0.51 extra item 0.01, EU UKP 0.51 extra item 0.01, Elsewhere UKP 0.61 extra item 0.01
MSUP
for model boats, MSUP A motor suppression kit consisting of 3 capacitors, insulation sleeve and installation diagram. These kits are particularly suitable for our speed controllers (where others may not be) but are equally suitable for all motor installations.

The suppression kit reduces radio frequency interference by absorbing these harmful frequencies, thus reducing or eliminating interference.

Price GBP 1.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.45 extra item .05, EU UKP 0.55 extra item .05, Elsewhere UKP 0.65 extra item .05
nipplelink
for model boats, nipplelink A plastic nipple link with a clamping screw mechanism. The link passes through the attachment point and securely clips to it's other half. A 2mm drilled brass insert and screw are used attach and adjust the nipplelink on the servo actuator rod.

Price GBP 0.35 Postage: base cost /additional item GBP  
Postage: UK UKP 0.52 extra item 0.02, EU UKP 0.52 extra item 0.02, Elsewhere UKP 0.62 extra item 0.02
oct dog
for model boats, oct dog 3/16 or 1/8" dog drive for Octura or graupner 2317 props

2 types available

18 1/8" dog drive Price UKP 3.15
316 3/16" dog Price UKP 3.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1 extra item 0.50, EU UKP 1.1 extra item 0.50, Elsewhere UKP 1.2 extra item 0.50
propshaft
for model boats, propshaft A propshaft having machined brass bearings and brass tube with a steel shaft. The shaft is threaded M4/4BA (same thread). Available in a number of lengths.

4 types available

5 5 inch Price UKP 5.00
6 6 inch Price UKP 5.15
7 7 inch Price UKP 5.35
8 8 inch Price UKP 5.45
Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item .10, EU UKP 1.7 extra item .20, Elsewhere UKP 2.1 extra item .30
quicklink
for model boats, quicklink A chromed metal quicklink for attaching the ends of servo linkages. This is a sprung link with a 2mm threded end and fits our 2mm rod

Price GBP 0.40 Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item .05, EU UKP 0.55 extra item .05, Elsewhere UKP 0.65 extra item .05
rabcoup
for model boats, rabcoup Raboesh modular Universal joint couplings. This is a highly flexible and simple method of connecting your drive at an angle.

You need at least a universal joint and two inserts but you can use a joiner piece to join two universal joints together to provide a double joint.

11 types available

02 2mm insert Price UKP 1.25
03 2.3mm insert Price UKP 1.25
05 4mm insert Price UKP 1.25
06 4.5mm insert Price UKP 1.25
07 5mm insert Price UKP 1.25
08 6mm insert Price UKP 1.25
09 1/8th insert Price UKP 1.25
20 4mm threaded insert Price UKP 1.25
30 joiner Price UKP 1.50
40 Universal Joint Price UKP 2.60
70 grub screw Price UKP 0.10
Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.65 extra item 0.05, Elsewhere UKP 0.75 extra item 0.05
ram-pushconn
for model boats, ram-pushconn A pushrod connector for mounting on arms

Price GBP 0.30 Postage: base cost /additional item GBP  
Postage: UK UKP 1 extra item 0.02, EU UKP 1.5 extra item 0.03, Elsewhere UKP 1.6 extra item 0.04
rudderarm
for model boats, rudderarm Heavy duty plastic arm with keyed brass insert, 3mm hardened/blackened hex socket grub screw (1.5mm key). Available in a number of sizes but can also be machined to requirements.

3 types available

2mm 14 SWG/ 12 AWG/ 2.05mm/0.081 inches Price UKP 0.50
316 3/16inches/4.76mm Price UKP 0.50
4mm 8 SWG/6 AWG/4.1mm/0.16 inches Price UKP 0.50
Postage: base cost /additional item GBP  
Postage: UK UKP 0.55 extra item 0.05, EU UKP 0.58 extra item 0.08, Elsewhere UKP 0.6 extra item 0.10
sc
for model boats, sc Silicon covered extra flexible cable

High strand count super flexible silicon covered cable suitable for power applications....

1mm for 400/480 motor systems - as supplied on MHF20 esc.

2.5mm for 540,700 etc motors - as supplied on our MHF series ESC's

4.0mm for super power applications.

codes SC(colour)(size) r=red, b=black, y=yellow

9 types available

b1.0 black Price UKP 1.25
b2.5 black Price UKP 1.50
b4.0 black Price UKP 4.50
r1.0 red Price UKP 1.25
r2.5 red Price UKP 1.50
r4.0 red Price UKP 4.50
y1.0 Yellow Price UKP 1.25
y2.5 yellow Price UKP 1.50
y4.0 yellow Price UKP 4.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.20, EU UKP 1.6 extra item 0.20, Elsewhere UKP 1.8 extra item 0.20
siltube
for model boats, siltube Silicon tube 1 metre length

Silicon tube suitable for water cooling etc.

4.5mm OD 2.5mm ID or 6.0mm OD 3mm ID

2 types available

4.5 siltube 4.5mm Price UKP 0.75
6 siltube 6.0mm Price UKP 1.10
Postage: base cost /additional item GBP  
Postage: UK UKP 0.62 extra item 0.02, EU UKP 0.72 extra item 0.02, Elsewhere UKP 0.82 extra item 0.02
smbellows
for model boats, smbellows Small bellows

A Small bellows for sealing servo rod drive to the rudder, these are adequate for most F/E applications and many others where a tight seal to a rod is required. We use these extending both inside and outside the hull. It is useful to mount them on a short piece of tube.

Price GBP 1.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.8 extra item 0.05, EU UKP 1 extra item 0.05, Elsewhere UKP 0.15 extra item 0.05
TAM
for model boats, TAM Plastic aerial tube and base. Base has brass retaining nut. Tube can be detached for transport/storage. Aerial is threaded through tube for use.

Price GBP 0.60 Postage: base cost /additional item GBP  
Postage: UK UKP 0.8 extra item 0.05, EU UKP 0.9 extra item 0.05, Elsewhere UKP 1.05 extra item 0.10
WAM
for model boats, WAM Whip aerial and base. Base has brass retaining nut. Whip can be detached for transport/storage.

Price GBP 2.50 Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item 0.10, EU UKP 1.1 extra item 0.10, Elsewhere UKP 1.1 extra item 0.10
xtaltidy
for model boats, xtaltidy A small crystal tidy. Injection moulded in black plastic this holder hasl locations for 5 sets of crystals which are plugged in to the moulded retaining holes.

Price GBP 0.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.6 extra item 0.10, EU UKP 0.6 extra item 0.10, Elsewhere UKP 0.7 extra item 0.10

Books



bristolchannmems
for model boats, bristolchannmems BRISTOL CHANNEL SHIPPING MEMORIES by Andrew Wiltshire, (ISBN : 1-902953-25-8)

Ellerman, Clan, Blue Funnel, Palm Line – shipping companies whose ships were a common sight in British ports in the 1960s and 1970s. This hardback book features vessels from these companies and more in a nostalgic look at shipping in the Bristol Channel during those glory years before the widespread growth of containerisation. Tankers, too, are featured along with coasters, dredgers, tugs, ferries and examples of other vessels to be seen at that time. The book's 80 pages contain 97 splendid colour photographs.

241mm x 195mm, landscape format; 80 pages.

Price GBP 15.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2.5 extra item 1.50, EU UKP 3.1 extra item 1.60, Elsewhere UKP 3.8 extra item 1.80
Coasters_IC
for model boats, Coasters_IC COASTERS IN COLOUR by Bernard McCall & Ian Willett,(ISBN : 0-9513576-6-2)

This hardback book has a colour photograph on each page along with a detailed caption giving information about the ship. The presentation follows an alphabetical theme which allows the authors to include some familiar vessels and companies alongside some more unusual ones.

23cm x 19cm, landscape format; 64 pages. Originally on sale at £12.00, this book is being offered at a bargain price as long as stocks last.

Price GBP 5.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2.5 extra item 1.50, EU UKP 3.1 extra item 1.60, Elsewhere UKP 3.8 extra item 1.80
Coasters_S&A
for model boats, Coasters_S&A COASTERS OF THE AVON AND SEVERN Bernard McCall (ISBN : 1-902953-00-2) The first in a series of books which look in detail at coastal vessels in specific areas. This volume reviews coastal traffic on the two rivers of the title and in local ports. Within its 80 pages are 30 colour and 51 black/white photographs. A5 size, landscape format; 80 pages. Price :

Price GBP 6.50 Postage: base cost /additional item GBP  
Postage: UK UKP 2.5 extra item 1.50, EU UKP 3.1 extra item 1.60, Elsewhere UKP 4.2 extra item 1.70
CSdec06
for model boats, CSdec06 COASTAL SHIPPING, December 2006

The December issue of Coastal Shipping was published on 28 November. All postal subscribers should receive their copy during the week that follows.

The "Coaster of the Past" in this issue is the Pass of Melfort , dating from 1926. "Port Panorama" does not feature a port at all! Rather it looks at coastal vessels passing through the spectacular scenery of the Sound of Mull. "Standard Coasters" makes a welcome return and reviews the 1500dwt type from the Hermann Sürken shipyard in Papenburg. This issue looks in detail at the latest news from Kent, from Scotland and from the east coast of England. There is a feature article about coasters in the River Thames during the 1960s. Also included is an item about a former German coaster now preserved in Ostend."Tanker Traffic" features two new tankers in addition to its usual round-up of sales and news.

Price GBP 2.70 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 1.00, EU UKP 1.7 extra item 1.10, Elsewhere UKP 2.2 extra item 1.20
HUDSON
for model boats, HUDSON HUDSON STEAMSHIP, Graham Atkinson, (ISBN : 1-902953-14-2)

The Hudson company is perhaps best known for its collier fleet that became a familiar sight loading coal in ports in the north-east of England for delivery to utility companiies in the south-east. It later expanded and its dry cargo ships appeard in other trades. Tankers of various sizes were also in the fleet. A link with the Norwegian Mosvold company brought several specialised ships into company management along with bulkers and tweendeckers. The book includes a detailed fleet list of all owned and managed vessels. Profusely illustrated by 143 black/white and 12 colour photographs.

A4 size, portrait format; 96 pages. Price :

Price GBP 13.00 Postage: base cost /additional item GBP  
Postage: UK UKP 3 extra item 1.50, EU UKP 3.6 extra item 1.60, Elsewhere UKP 4.7 extra item 1.70
trap-feb
for model boats, trap-feb Fast Electric Powerboats

By: Paul Williams

Advances in technology have made electric powered model powerboats very exciting to build and race. Convenient in size and 'clean and green', they can be used in many smaller venues not suitable for I/C powerboats. Design considerations, building methods, choice of motors, speed controllers and batteries are all explained in full. There's advice on trimming your boat for best performance and details of competition requirements.

Price GBP 9.95 Postage: base cost /additional item GBP  
Postage: UK UKP 3 extra item 1.50, EU UKP 5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-ibm
for model boats, trap-ibm Introduction to Marine Modelling

By: John Davies & Chris Jackson

New to marine modelling? Then this title will start you off in the right direction, no matter which type of radio controlled boat you want to build. Each section looks at a different facet of this varied hobby, from powerboats to steam, scale electric to scale sail, offering expert advice on choice of model, power and radio requirements.

Price GBP 9.95 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-iss
for model boats, trap-iss Introduction to Radio Controlled Scale Sailing Models

by Phillip Vaughan Williams

The definitive guide to radio controlled scale sailing models. This book contains systematic coverage of planning a scale sail project, basic modelling techniques, solutions to scaling problems, radio control systems, sailing techniques, prototype subjects, plus detailed information on hull, deck, mast, spars, sails, rigging and more. With over 100 photographs and a multitude of diagrams, this book is a wealth of information and advice allowing you to fully develop your skills in scale sail modelling.

Price GBP 12.95 Postage: base cost /additional item GBP  
Postage: UK UKP 2.75 extra item 1.00, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-mbws
for model boats, trap-mbws Making Model Boats With Styrene

by Richard Webb

Richard Webb has been making and sailing model boats fro 25 years. Here he shows the skills he has gained can be used to produce excellent models fromm styrene, simply by adapting the skills used for creating boats in wood sheet.

Price GBP 9.50 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-mrcm
for model boats, trap-mrcm The Complete Marine Radio Control Manual

196 page soft back book (revised edition by James Ramsey), from the original by Hugh Bright.
The first comprehensive manual on the application of radio control to all aspects of marine modelling. With the emphasis firmly on practical advice based on a lifetime's experience, the author first describes the equipment required - transmitters, receivers, servos, electric motors and batteries - and then goes on to explain how they can be modified and employed to serve various functions such as controlling sails and auxiliary working features, providing both a guide for beginners, and information for the more experienced modeller. As well as the technical aspects of fitting out a ship model with radio control equipment, tools required and practical routines for its maintenance and safe operation are also described. This book is simply a must for all working model shipwrights.

Price GBP 12.50 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-mst2
for model boats, trap-mst2 Model Submarine Technology

The definitive book on submarine modelling Model submarines, which can actually submerge under water and then surface again at a quite different location, hold a special attraction for the onlooker. This book shows how it is done, explaining the extensive and sophisticated technology that has to be installed in these slim hulls, together with a wide range of electronic safety circuits and sensible methods of using them.

104 pages featuring:
Hull construction
Watertight shaft seals
Strength calculations and diving tank technology Trimming
Depth regulators
Emergency surfacing systems
Numerous auxiliary working systems including periscope, camera, torpedoes & manipulators
Safety advice
Parts lists


Price GBP 14.80 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-pmb
for model boats, trap-pmb Painting Model Boats by Rick Eyrich

Learn the art of painting model boats in this exciting book detailing how to paint static and R/C models.

SUITABLE FOR BOTH NOVICE AND EXPERT ALIKE, THE BOOK FEATURES:
* The basics of painting model boats
* Hull preparation for painting
* Surface shaping, filling, priming and waterproofing
* How to transfer chosen finishes on to vessels
* Ways to protect a boat once it has been painted
* Clear coats, graphic applications and repairs


Price GBP 12.75 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-smb
for model boats, trap-smb Scale Model Boats By: John Cox

A wealth of information which sets out the possibilities from the simplest construction to the most advanced. There's hints and tips and background information to help you get the maximum enjoyment from the building and operating of scale model boats.

Price GBP 9.50 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-smo
for model boats, trap-smo Submarine models and their originals by Carsten Heintze

Submarines have a unique fascination. What makes them so special - in the original as well as in the model - is the breadth of technology that is required for a vessel to dive and, above all, to return safely to the surface.

In this book Carsten covers:
A comprehensive collection of submarines
Models and their associated originals from all periods of underwater travel
Submarines for civilian use
Various types of military submarines
Model making using a wide range of construction techniques
Diverse diving technology, from the simple model that dives dynamically to high-tech submarines with complicated diving systems

So why not take a dive into this book and discover an undersea world of new ideas and information for your next model submarine?

Price GBP 12.90 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-smw
for model boats, trap-smw Scale Model Warships by Tim Morgan

Join Tim Morgan as he guides you through the fascinating world of model warships.
WITH EMPHASIS ON MODERN SHIPS AND UP TO DATE MODELLING METHODS, THE 120 PAGES FEATURE:
* Plans and research
* Specialist suppliers
* Construction of superstructures, hulls and decks
* Working in plastic and brass as well as fittings, finishing and painting

An all round excellent book to add to your library

Price GBP 12.50 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-sub
for model boats, trap-sub Simply Submarines By: Chris Jackson

Since 1986 Marine Modelling International magazine has regularly featured submarines, both models and fullsize, and hence over the years a large stock of information has developed. The features selected for this compendium are written by experts and cover the full span of active use of the submarine in warfare, starting from the CSS Hunley and finishing with the latest nuclear Royal Navy submarine HMS Trenchant. With 112 pages, many photographs and fully illustrated diagrams this book contains an array of hints & tips for model makers which apply to other designs as well as model submarines. Chapters on the history of submarines, diving systems and frequently asked questions, also provide indepth information which is essential for any model submarine maker. An essential read for any modeller wishing to further their knowledge of this fascinating form of marine modelling.

Price GBP 9.50 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
trap-tug
for model boats, trap-tug The Tug Boat Book

Edited By: Chris Jackson

The ultimate guide to building Tug models; old, new, unusual and unique. This compendium of features brings together a wide variety of choices; ancient to modern, scratch build to kit, electric or steam power, minimal functions to the most complex. 'The Tug Boat Book' will help guide you through your tug building with a whole range of useful building tips and ideas. Whether you're new to the model boating hobby or an old hand, you will find plenty to enjoy in these varied accounts of model tug building on a grand scale.

Price GBP 9.95 Postage: base cost /additional item GBP  
Postage: UK UKP 3.25 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 6.5 extra item 3.00
tugs&os06/07_uk
for model boats, tugs&os06/07_uk TUGS AND OFFSHORE SUPPLY VESSELS 2006/07 (UK & IRELAND)by James Dodds, (ISBN : 1-902953-19-3)

The new expanded edition of this popular reference book lists vessels owned or operated by British and Irish companies. Owners are arranged alphabetically and vessels within their fleet are similarly listed. Basic technical details are provided, and there is an index of current and former names. 63 colour photographs. A5 size, portrait format; 88 pages.

Price GBP 9.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2.5 extra item 1.50, EU UKP 3.1 extra item 1.60, Elsewhere UKP 3.8 extra item 1.80
Tugsnoffshore_bs
for model boats, Tugsnoffshore_bs TUGS AND OFFSHORE SUPPLY VESSELS 2006/07,BALTIC & SCANDINAVIA) by James Dodds, (ISBN : 1-902953-21-5)

This is a follow-up to the similar book on UK and Irish fleets, and lists tugs and offshore supply vessels owned or operated by companies in Denmark, Estonia, Finland, Iceland, Latvia, Lithuania, Norway, Poland and Sweden. Owners are arranged alphabetically and vessels within their fleet are similarly listed. Basic technical details are provided, and there is an index of current and former names, totalling over 1700 names. 79 colour photographs.

A5 size, portrait format; 112 pages. Price :

Price GBP 12.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2.5 extra item 1.50, EU UKP 3.1 extra item 1.60, Elsewhere UKP 3.8 extra item 1.80
Tugs_in_colour_uk
for model boats, Tugs_in_colour_uk TUGS IN COLOUR - U.K. Bernard McCall (ISBN : 1-902953-11-8) In its 80 pages, this book contains over 90 glorious colour images of tugs throughout the UK from Falmouth to Sullom Voe. The tugs range from the 1861-built Mayflower to the 2004-built Svitzer Bristol. 241mm x 195mm, landscape format; 80 pages. Price : £14.00 (€22,-)

Price GBP 14.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2.5 extra item 1.50, EU UKP 3.1 extra item 1.60, Elsewhere UKP 3.8 extra item 1.80
Waveney
for model boats, Waveney THE WAVENEY LIFEBOATS, by Nicholas Leach, (ISBN : 1-902953-01-0)

The 44ft Waveney class lifeboat was the first fast lifeboat to see service with the RNLI. This book traces the history of the class from the development by the US Coast Guard to eventual service with the RNLI. It has seen service in extreme sea conditions on both sides of the Atlantic. Details of each member of the class are included, along with several phtoographs of each lifeboat. Profusely illustrated by many colour photographs, diagrams and lists, this is the definitive history of the Waveney class.

A4 size, portrait format; 88 pages. Price : This is a special offer - the advertised selling price is £12.00.

Price GBP 6.50 Postage: base cost /additional item GBP  
Postage: UK UKP 3 extra item 1.50, EU UKP 3.6 extra item 1.60, Elsewhere UKP 4.3 extra item 1.80

Electronics



AMIX
for model boats, AMIX A two channel rudder/speed mixer

Provides rudder/speed mixed o/p for use with 2 plus speed controllers. Straight through outputs eliminate the need for 'y' leads. Provides excellent manouverability for multi screw boats.

No messing set up - this unit sets itself at switch on. For perfect results use our HFR15 controllers and take advantage of full auto set up.

Price GBP 21.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 2 extra item 0.50, Elsewhere UKP 2.5 extra item 0.50
Dan-Master
for model boats, Dan-Master A range of Brushless ESC's purpose built for model boat use. We currently have available 70 and 100 amp versions and the program box. They look extremely like Hacker Master ESC's. These are Watercooled and waterproof, have timing, cell and advance selection.

3 types available

100-opto 100 opto Price UKP 55.00
70opto 70 amp opto Price UKP 40.00
prog prog box Price UKP 15.00
Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 1.50, EU UKP 2.2 extra item 1.60, Elsewhere UKP 2.6 extra item 1.80
Dan-vis-a6
for model boats, Dan-vis-a6 The Danlions Vislero charger is an extremely capable charger/ dis-chrger / balancer for 1-18 NiCd, NiMh and/or 1-6 Li-Ion, Li-Po, Li-Fe. cells. The cahrger is software driven and updates are available on-line. The charger comes complete with PC link, PC software, internal balancer, External balance connectore for the two major type of balance connection, Power input and output leads.

The balancer will balance up to 6 cells in series which may include charge/balance of up to 3 2s packs in series or 2 3s packs (ALL THE SAME TYPE).

An Optional 10 amp bench charger is also available with UK style plug, for bench etc use.

2 types available

Charger w accessories Price UKP 75.00
+psu charger w 10 amp PSU Price UKP 95.00
Postage: base cost /additional item GBP  
Postage: UK UKP 3.5 extra item 1.50, EU UKP 4.5 extra item 2.00, Elsewhere UKP 5 extra item 2.00
DBEC
for model boats, DBEC Discrete 5 volt BEC unit. 5 volts for your RX from 6-12 volt motor battery.

A very low loss BEC circuit that will supply a regulated 5 volt output from a source voltage of 5.5 volts. flying leads for battery connection and servo lead for RX.

Price GBP 6.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.6 extra item 0.10, EU UKP 0.65 extra item 0.15, Elsewhere UKP 0.7 extra item 0.20
etti-100 esc
for model boats, etti-100 esc From the ETTI stable comes an improved 100 amp race hardened brushless ESC. This esc is actually more capable than the 125 which it replaces and will run 100 amps constant, 150 peak for 10 seconds. Intelligent auto zero detection, shut down on loss of signal, frequency and timing adjustable via the TX as is cut off and LIPO safety setting.

6-16 Nimhor NIcd, 2-5 LiPo, BEC 6v 3amp, size 95x50x13mm

Price GBP 79.00 Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 1.00, EU UKP 2.5 extra item 1.20, Elsewhere UKP 3 extra item 1.50
etti-bec
for model boats, etti-bec An ETTI switch mode, low loss, low noise, 5 volt 1.5amp bec for use between 6 and 26 volts.

Price GBP 6.50 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2.2 extra item 0.70
etti-esc
for model boats, etti-esc A choice of ETTI brushless esc's.

All controllers have 5 volt 3 amp BEC from switching psu, watercooled heatsink, brake select, 4 timing modes 1,7,15,30 degrees, 8/16/32k pwm frequency, auto shut down, auto half/full stick detection

45amp 6-16 cells 32mm x 45mm x 20mm. 2.5mohm, 5v 2amp bec

100 amp 6-16 cells 2-5 lipo's, race hardened ESC. 6-24 volts 100 amps continuous, 150 amp peak (10 seconds) 95 x 50 x 13 mm , 6v 3 amp BEC

125 amp 6-20 cells 2-7 lipo (6-30 volts) 32 fets 70*38*23 1 mohm

70 amp 6-16 cells 68mm x 38mm x 19mm

200 amp 6-16 cells 2-5 lipo (6-24 volts) 54 fet's o.44 mohm 70mm x 38mm x 28mm

6 types available

Price UKP
125-6-16 125-6-16 Price UKP 60.00
125-6-20 125-6-20 Price UKP 65.00
200-6-16 200-6-16 Price UKP 105.00
45-6-16 45-6-16 Price UKP 30.00
70-6-16 70-6-16 Price UKP 49.00
Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 1.00, EU UKP 2.5 extra item 1.00, Elsewhere UKP 3.5 extra item 1.50
etti-mixer
for model boats, etti-mixer A dual channel mixer from ETTI. Suitable for yuse in model boats. The mixer takes two RX channels in and delivers mixed output for ESC control.

Price GBP 12.50 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2.1 extra item 0.60
fei-servotester
for model boats, fei-servotester A small solid state servo tester that has manual or cycle control.

Price GBP 9.95 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2.4 extra item 0.70
FEI-UBEC
for model boats, FEI-UBEC A compact 3amp 5 volt bec unit that will function from with from 6-20 volts input. Designed to provide power for multiple and high torque servos where no RX battery is available.

Price GBP 12.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item .30, EU UKP 2 extra item .50, Elsewhere UKP 3 extra item 1.00
futlead
for model boats, futlead A quality futaba type servo lead. The tabs on the lead can be trimmed so that it will fit the majority of radios. The leads are held in the shell by metal spring tabs which can be depressed to release the lead if re-arrangement is necessary.

Price GBP 1.60 Postage: base cost /additional item GBP  
Postage: UK UKP 0.5 extra item 0.00, EU UKP 0.5 extra item 0.00, Elsewhere UKP 0.5 extra item 0.00
g3329
for model boats, g3329 A flat water cooling plate for speed controllers. approx 40mm x 25mm x 5mm. constructed from a solid Aluminium plate that is drilled and cross drilled. longitudinal holes have connecting tubes and the cross hole is plugged.

Price GBP 5.05 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.30, EU UKP 1.8 extra item 0.40, Elsewhere UKP 2 extra item 0.40
g6446
for model boats, g6446 Product information A reliable, robust switching mains power supply in a slim-line case, with comprehensive protective measures guarding against overload, short-circuit and reverse polarity. The primary pulsed switching mains PSU supplies a stabilised DC voltage at the outputs of 12 ... 14 V, at a current of up to 10 A depending on conditions. The output voltage is infinitely variable between 12 ... 14 V using a screwdriver on the underside of the unit. The default output voltage is 13.8 V. The adoption of a switching frequency of around 70 Hz allows the use of very small components and therefore a small case. Switching mains PSUs do not require a transformer, and this means a weight saving compared with conventional linear mains PSUs of about 80%. Electrical units are connected using 4 mm sockets.

Specification: Input voltage 230 V ± 10 % 50/60 Hz, Input power max. 160 VA , Output voltage au ralenti 12 ... 14 V ± 5 % no-load, Output current 10 A continouse, handles brief overload peaks, Efficiency typically 85 % , Protection measures IP 20, Dimensions (LxWxH) approx. 175 x 115 x 45 mm, Weight approx. 900 g

You will need to replace the supplied plu for UK use.

Price GBP 32.50 Postage: base cost /additional item GBP  
Postage: UK UKP 4 extra item 4.00, EU UKP 6 extra item 6.00, Elsewhere UKP 8 extra item 8.00
HFS-05MS
for model boats, HFS-05MS 5ch single conversion micro Receiver

The HFS-05MS receiver replaces the old 4ch ’Feather’ receiver. It is the sane size as the feather and uses standard crystals
• ideal for micro boats and weight critical applications
• Cahnnels 1-4 and 6 (not Ch 5).
• SMT (surface mount technology) to reduce size and weight
• Automatic gain control

Size: 38.8 x 19.3 x 12mm - Weight : 7.9g / 0.28oz - FM Single conversion – Auto gain control – Narrow Band.

Price GBP 15.75 Postage: base cost /additional item GBP  
Postage: UK UKP 1.25 extra item 0.25, EU UKP 1.55 extra item 0.30, Elsewhere UKP 2 extra item 0.50
HIT HS-785HB
for model boats, HIT HS-785HB The HS-785HB sail winch servo with it's large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails.With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

Motor Type: 3 Pole, Bearing Type: Dual Ball Bearing, Speed: 1.68 / 1.38 sec @ 60 deg., Torque: 152.75 / 183.31 oz.in (4.8v/6v) 11.0 / 13.2 kg.cm, Size: 2.32" x 1.14" x 1.96" 59.00 x 29.00 x 50.00mm, Weight: 3.88oz 110.00g

Price GBP 22.50 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.30, EU UKP 2 extra item 0.50, Elsewhere UKP 2.7 extra item 0.70
Hitech Servos
for model boats, Hitech Servos A range of servo's for all applications from Hitec.

2 types available

HS81MG HS81 mini servo metal gears Price UKP 18.50
HS85MG HS85MG - Mighty Micro servo - metal gears Price UKP 19.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.25, EU UKP 1.75 extra item 0.25, Elsewhere UKP 4.5 extra item 2.5
hmaster
for model boats, hmaster Hacker Master brushless motor controllers.

Designed by Rainer Hacker and Jeti to provide optimum performance from Hacker 2 pole brushless motors and multipole motors such as plettenberg and Mega. These controllers come in a variety of current and voltage ratings - if you do not see what you want please contact us.

These controllers have 4 user selectable programs that match other manufacturers motors e.g. Lehner, Plettenberg and Aveox. Excellent performance for price and simple to use and set up. The new controller design enables the controller to be set up more precisely via use of a controller program box which gives access to degree by degree timing and more.

6 types available

18f 18-8 flight 4-14 cells Price UKP 45.00
M40NB 6-12 cells - 40 amps, BEC Watercooled Price UKP 85.99
M70NB 6-12 cells - 70 amps continuous Master 70 Navy BEC Price UKP 108.00
M70NO 6-16 cells - 70 amps continuous Master 70 Navy Opto Price UKP 105.00
M77NO 8-32 cells - 77 amps water cooled/proof opto isolated Price UKP 159.00
M99N 8-32cells - 99 amps water cooled/proof Master Navy 99 Price UKP 195.00
Postage: base cost /additional item GBP  
Postage: UK UKP 3.5 extra item 1.00, EU UKP 4.5 extra item 1.00, Elsewhere UKP 6.5 extra item 2.00
Intellicontrol v3
for model boats, Intellicontrol v3 The Simprop Intellicontrol charger for NiCd, Nimh, Lead Acid and Lithium, cells 1-25 nicd/nimh cells, 1-3 lithium, 0-5 amps, programable to charge/discharge and cycle cells, 9 program memory. Excellent charger for the price

Price GBP 88.99 Postage: base cost /additional item GBP  
Postage: UK UKP 3.5 extra item 1.50, EU UKP 4.5 extra item 1.50, Elsewhere UKP 6.5 extra item 2.50
MSUP
for model boats, MSUP A motor suppression kit consisting of 3 capacitors, insulation sleeve and installation diagram. These kits are particularly suitable for our speed controllers (where others may not be) but are equally suitable for all motor installations.

The suppression kit reduces radio frequency interference by absorbing these harmful frequencies, thus reducing or eliminating interference.

Price GBP 1.50 Postage: base cost /additional item GBP  
Postage: UK UKP 0.45 extra item .05, EU UKP 0.55 extra item .05, Elsewhere UKP 0.65 extra item .05
rch - vic
for model boats, rch - vic A choice of two Victory 90 amp conventional ESC's V 90-614/opto and v90-1032/opto. 614 will run 6-14 cells to an absolute maximum of 20 volts ( so HV cells may exceed the stated capability and will cause the driver to blow - we recommend 12 cells max). 1032 will work from 10 to 32 cells. Both are opto isolated sealed and watercooled.)

2 types available

90-1032 90-1032 Price UKP 53.00
90-614 90-614 Price UKP 50.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.8 extra item 1.00, EU UKP 2.2 extra item 1.20, Elsewhere UKP 2.8 extra item 1.80
schottky
for model boats, schottky Schottky diodes are low forward voltage diodes that are very useful in suppressing electronically generated spikes. i.e. as from a motor with a digital speed controller.

The 5A version has a fwd voltage of 0.66v, reverse voltage of 100v fowd currnet of 5A and peak current of 1900A (Ideal with MHF30 and up.

The 1A version has fwd voltage of 0.58v, reverse voltage of 60v, fwd current of 1.1A, peak current of 90A ideal with MHF20.

2 types available

1A 1amp 60v Price UKP .60
5A 5amp 100v Price UKP 1.50
Postage: base cost /additional item GBP  
Postage: UK UKP 0.34 extra item 0.05, EU UKP 0.34 extra item 0.05, Elsewhere UKP 0.47 extra item 0.05
SLOMO
for model boats, SLOMO A servo slo unit with adjustable speed control

The Slo-Mo is a unit that slows down servo movement. As with most of our electronic units, this is driven by a microcontroller running at 16 Mhz. This provides a silky smooth output of approximately 15,45,75 or 105 seconds from end to end.

Price GBP 21.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.5 extra item 0.50, Elsewhere UKP 2.5 extra item 0.50
STec Servos
for model boats, STec Servos A full range of Supertec servo's to suit your every need.

1 types available

s125/1T 40.5x20x42,50g,.26s/60d,6.6kgcm 1 Turn sailwinch Price UKP 14.99
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.5 extra item 0.50, Elsewhere UKP 2 extra item 0.50
SW30
for model boats, SW30 A relay switch unit for power applications up to 30 amps

Designed as a cheap alternative to a speed controller the switcher is able to cope with currents up to 30 amps for use in formula 2 and 3 boats. The unit is available with optional BEC and Braking capability. The BEC is the same as our stand alone unit.

Price GBP 16.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 2 extra item 0.50, Elsewhere UKP 2.5 extra item 0.50
victory
for model boats, victory A choice of Victory controllers from RC-hydros.

60-612 - 6-12 cells BEC 60 amp

60-614 - 6-14 cells Opto 60 amp

90-614 - 6-14 cells Opto 90 amp

90-1032 - 10-32 cells Opto 90 amp

4 types available

v60-612 60-612 Price UKP 58.00
v60-614 60-614 Price UKP 58.00
v90-1032 90-1032 Price UKP 77.00
v90-614 90-614 Price UKP 75.00
Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 0.50, EU UKP 2.2 extra item 0.60, Elsewhere UKP 3 extra item 1.00
victory sw
for model boats, victory sw Victory ESC programming software and connection cable

Price GBP 12.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.7 extra item 0.60, Elsewhere UKP 2.4 extra item 0.90
yge
for model boats, yge Yge controllers and program card...

75 amp navy.
2-6 S LiPo,6-18 cell NiXx. BEC: 5V. Timing in 5 Stages. frequency: 16 kHz. Max 240.000 rpm (2-Pole motor). Overcurrent detection shut down,Over temperature detection shut down. Size: 82 x 38 x 13 mm. Weight: 23g, with cable 42g. 120 navy as above but... Size: 70 x 25 x 11 mm, weight: 29g, with cable 47g

3 types available

120N 120 Navy Price UKP 120.00
75N 75 Navy Price UKP 82.00
prog prog card Price UKP 12.00
Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 0.50, EU UKP 2.1 extra item 0.60, Elsewhere UKP 3 extra item 1.00

Hardware



as400flexhws
for model boats, as400flexhws AsTec Stainless steel flex surface drive hardware set for 400/480 driven models. Includes 098 flex with 1/8" stub shaft and dog drive. Octura X431P prop, Rudder and rudder post, Strut, Brackets (not drilled so you can position as you want), Servo hardware and bellows - mounting screws (3mm stainless steel and stainless lock nuts)

The 400 set has a 2.3mm motor coupling the 480 set has a 1/8" motor coupling. Both are bored 2.5mm for .098 cable. THIS ITEM IS MADE TO ORDER

2 types available

-400 for 400 motors Price UKP 35.00
-480 for 480 motors Price UKP 35.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.2 extra item 0.20, EU UKP 1.7 extra item 0.20, Elsewhere UKP 2.2 extra item 0.20
Build
for model boats, Build We have the services of an experienced FE boat builder available. If you are not able or do not have the time to dop your own build we can help. Please contact us to discus your needs and requirements. Prices on application

Price GBP POA Postage: base cost /additional item GBP  
Postage: UK UKP 0 extra item , EU UKP 0 extra item , Elsewhere UKP 0 extra item
coup
for model boats, coup solid aluminium coupling in a variety of sizes to suit all our hardware to all motors.... 400 is 2.3mm, 480,500,540(05),600 motors are 1/8". Plett BB700, 800, mega,Hacker motors are 5mm.

7 types available

1/8-130 solid coupling 1/8"-0.130" Price UKP 5.50
1/8-4 solid coupling 1/8"-4mm Price UKP 5.50
1/8-098 solid coupling 1/8"- 0.098 Price UKP 5.50
1/8-2mm solid coupling 1/8 to 2mm Price UKP 5.50
2.3mm-098 solid coupling 2.3mm- 0.098(2.5mm) Price UKP 5.50
2.3mm-2mm solid coupling 2.3mm- 2mm Price UKP 5.50
5mm-130 solid coupling 5mm-0.130 Price UKP 5.50
Postage: base cost /additional item GBP  
Postage: UK UKP 0.6 extra item 0.10, EU UKP 0.6 extra item 0.10, Elsewhere UKP 0.6 extra item 0.10
ecoflex
for model boats, ecoflex Eco style flexible shaft hardware

A flexible subsurface drive shaft, coupling and rudder for subsurface drive boats boats. Features a 4mm threaded end 4mm shaft and twin lead teflon bearings. The flex runs in a teflon lined Aluminium tube. 7 cell has .098 cable, 12 cell has.130 cable

2 types available

hw12 12 cell eco hardware Price UKP 30.00
hw7 7 cell eco hardware Price UKP 28.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 2 extra item 0.50, Elsewhere UKP 2.5 extra item 0.50
ecohwst
for model boats, ecohwst Straight drive eco boat hardware set

A hardware set for subsurface drive boats consists of stainless steel shaft and outer with lead teflon bearing and teflon thrust washer, motor coupling - 2mm to 1/8" , stainless steel rudder and rudder shaft, tiller arm.a

4 types available

rud replacement rudder Price UKP 7.00
set complete set - shaft , rudder,coupling Price UKP 18.00
shft spare shaft Price UKP 6.00
shft/tube replacement shaft and tube Price UKP 10.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 2 extra item 0.50, Elsewhere UKP 2.5 extra item 0.50
etti-eco
for model boats, etti-eco Professional standard eco hardware set from ETTI includes 1.2mm wire drive 4mm threaded stub, ball raced strut, 1/8th to 1.2mm collet coupling, Choice of Eco rudder swept /curved (rud1) - straight blade (rud2), 310mm wire drive would suit FM1 class or could be used for a 400 class surface drive (ask us to drill the trut.)

7 types available

310wire 310 mm wire drive Price UKP 25.00
coup coupling Price UKP 9.00
rud1 rud1 Price UKP 13.50
rud2 rud 2 Price UKP 13.50
set1 complete set curved rudder Price UKP 44.00
set2 complete set straight rudder Price UKP 44.00
std wire wire drive Price UKP 22.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.8 extra item 0.30, EU UKP 2.1 extra item 0.40, Elsewhere UKP 2.7 extra item 0.70
etti-fhex
for model boats, etti-fhex A choice of flex hex couplings for differing cable sizes and motors, from ETTI.

5 types available

1/8-130 1/8th-130 Price UKP 7.50
1/8-2 1/8th- 2mm Price UKP 7.50
3.18/1.2 3.18 - 1.2mm (eco) Price UKP 7.50
5/130 5mm-0.130 in Price UKP 7.50
5/150 5mm-0.150 inch Price UKP 7.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 1.8 extra item 0.20
etti-mtrmnt
for model boats, etti-mtrmnt A choice of motor mounts to suit 380/540 size motors (B/L or std) from ETTI. 380 size is shown, 540 size is annodised blue. Out-runner mount has integral plate based water cooling. mounts have fibreglass side panels

3 types available

380 380 Price UKP 14.00
380out 380 outrunner Price UKP 11.00
540 540 Price UKP 15.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 1.8 extra item 0.20
etti-rudder
for model boats, etti-rudder An anodised wedge rudder assembly with water pickup from ETTI. Rudder blade is 75mm long transom to rear of blade is 60mm blade is 20mm wide. Choice of colours is available dependent on stock (Blue, Green, Red)

Price GBP 13.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.8 extra item 0.30, EU UKP 2.2 extra item 0.40, Elsewhere UKP 2.5 extra item 0.50
etti-sset
for model boats, etti-sset Light weight complete strut/rudder set from ETTI.

Includes: straight wedge rudder with water pickup 70mm long 20mm wide, rudder offset bracket offsets approx 40mm trails approx 50mm, Strut with 4mm ball race 40mm long 45 mm high, strut bracket adjustable position 55mm long. 4mm threaded or 4mm stepped to 1/8th with 1/8th dog or 4mm with 3/16th dog and sleeve for 3/16 octura props. Includes 10" 130 cable and teflon outer

3 types available

1/8 1/8th drive Price UKP 39.95
3/16 3/16th Price UKP 42.00
4mm-t 4mm thread Price UKP 39.95
Postage: base cost /additional item GBP  
Postage: UK UKP 2 extra item 0.50, EU UKP 2.3 extra item 0.60, Elsewhere UKP 2.6 extra item 0.80
etti-sting
for model boats, etti-sting ETTI stinger drive strut.

weight: 30gram,length: 65mm (2 5/8") Aluminium body with teflon bearings for a 4mm shaft reduced to 1/8th inch (with dog drive) or 4mm threaded shaft, with 9 inches 3.2mm flex cable and teflon liner.

2 types available

1/8th 1/8th Price UKP 32.00
4mm 4mm Price UKP 34.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.8 extra item 0.30, EU UKP 2.3 extra item 0.50, Elsewhere UKP 3.75 extra item 0.75
etti-sting
for model boats, etti-sting ETTI stinger drive strut.

weight: 30gram,length: 65mm (2 5/8") Aluminium body with teflon bearings for a 4mm shaft reduced to 1/8th inch (with dog drive) or 4mm threaded shaft, with 9 inches 3.2mm flex cable and teflon liner.

2 types available

1/8th 1/8th Price UKP 32.00
4mm 4mm Price UKP 34.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.8 extra item 0.30, EU UKP 2.3 extra item 0.50, Elsewhere UKP 3.75 extra item 0.75
etti-trim
for model boats, etti-trim ETTI Trim tabs. Two styles available

light trim tabs (pictured size 51mm wide 31mm deep suit mono 1 /mono 2. Mount bolts to transom and adjustment screws are in the mount. Tab is slotted for vertical adjustment and fits between mount and transom.

micro tabs 31mm wide tapering to 22mm, 41mm deep suit boats 400-600mm. Bolted to transom - bolt goes into a threaded post which acts as an adjuster. small screws for secondary fixing.

2 types available

medium medium Price UKP 12.00
small Small Price UKP 10.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.8 extra item 0.60, Elsewhere UKP 2.3 extra item 0.80
etti-turn
for model boats, etti-turn An anodized turn fin set from ETTI includes two blades, two brackets and mounting screws. blades are 25mm wide and 55 mm long

Price GBP 9.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.8 extra item 0.60, Elsewhere UKP 2.3 extra item 0.80
Fastners
for model boats, Fastners A range of Stainless Steel fastners suitable for the model boater. Screws are caphead with Allen sockets. Nuts are Standard full nuts.

10 types available

m2.5x6ss m2.5 x 6mm long stainless Price UKP 0.12
m3nutss m3 Stainless hex nut Price UKP 0.05
m3nutssny m3 stainless hex nyloc nut Price UKP 0.08
m3x10ss m3 x 10mm stainless Price UKP 0.08
m3x12ss m3x12ss Price UKP 0.09
m3x8ss m3x8 stainless Price UKP 0.08
m4 12mm m4x12ss Price UKP 0.10
m4nutss m4 stainless hex nut Price UKP 0.08
m4nutssny m4 stainless hex nyloc nut Price UKP 0.09
m4x10ss m4 x 10mm long stainless Price UKP 0.09
Postage: base cost /additional item GBP  
Postage: UK UKP 0.29 extra item 0.01, EU UKP 0.31 extra item 0.01, Elsewhere UKP 0.51 extra item 0.01
flex
for model boats, flex Flexi shaft dog or screw thread, thrust washer, retaining nut and teflon tube as appropriate.

A stainless steel stub shaft tapped for the drive retaining nut. Drilled to suit the flex shaft to a suitable depth. We use only original Octura flex glued in with loctite 603. The flex length can be cut to suit to save you this tricky job, but prices are based on 10 inches from the front of the prop (the bit that buts against the strut)for 130 and 150 flex and 6 inches OAL for 098 flex. Original Octura teflon outer is supplied to suit.

We can supply the 3/16" with reduced end for 4mm nut or threaded for 4mm prop or with 150 cable to order Price on application.

11 types available

098/d/18/ 098 cable, dog, 1/8" stub 3mm nut Price UKP 13.00
098/t/4/4 098 cable, 4mm stub threaded 4mm Price UKP 13.00
130/d/316/4 130 cable, dog, 3/16 Price UKP 14.00
130/d/316/5 130 cable, dog,3/16 stub 5mm nut Price UKP 13.00
130/t/316/4 130 cable, 3/16" stub, 4mm thrd Price UKP 13.00
130/t/4/4 130 cable, 4mm stub threaded 4mm Price UKP 13.00
150/d/316/4 150 cable, dog,3/16" stub, 4mm nut Price UKP 15.00
150/d/316/5 150 cable dog, 3/16" stub 5mm nut Price UKP 14.00
150/t/316/4 150 flex, 3/16 stub 4mm thread Price UKP 15.00
extra 1 inch extra length Price UKP 0.50
fl130/d/316/18 130/d/316/18 3/16th to 1/8th for e.g. 432 Price UKP 15.00
Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item 0.10, EU UKP 1.1 extra item 0.10, Elsewhere UKP 1.6 extra item 0.10
flexhex
for model boats, flexhex Octura flexhex coupling A superior method of coupling a motor to a flexible shaft. The flex hex has set of tapered jaws that grip the cable tighter as it is done up. The motor end has a standard grub screw for clamping the shaft. available in a range of sizes for motors 1/8", 3/16" (.187) and 5mm. Flex sizes .098, .130, .187

6 types available

1/8-098 1/8 Price UKP 10.50
1/8-130 1/8 Price UKP 10.50
3/16-130 3/16 Price UKP 10.50
5mm-130 5mm - 0.130 Price UKP 10.50
5mm-150 5mm - 0.150 Price UKP 10.50
5mm-3/16 5mm - 3/16 Price UKP 10.50
Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.20, EU UKP 1.7 extra item 0.30, Elsewhere UKP 1.9 extra item 0.40
fullhdexlbkt
for model boats, fullhdexlbkt An extra long (3 1/4" - 83mm) Aluminium strut bracket designed to take the fullers 20 cell strut bracket. This bracket is best suited for mono's, particularly offshore types, but could be used for hydros. The fullers right angle rudder bracket can be used with this strut to give prop/rudder side by side configuration.

Price GBP 22.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.6 extra item 0.60, Elsewhere UKP 2 extra item 1.00
fullhdlbkt
for model boats, fullhdlbkt Fullers 20 cell strut bracket -heavier duty for 20 cells strut bracket - 7/12 cell struts will not fit

Price GBP 15.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item 0.10, EU UKP 1.2 extra item 0.10, Elsewhere UKP 1.3 extra item 0.10
fullhdsbkt
for model boats, fullhdsbkt Fullers 20 cell strut bracket -2 7/8" long aluminium brackets suitable for the 20 cell strut on hydro's.... NB all struts will fit

Price GBP 11.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item 0.10, EU UKP 1.2 extra item 0.10, Elsewhere UKP 1.3 extra item 0.10
fullhdxlbktos
for model boats, fullhdxlbktos An extra long (5 1/4" - 138mm) Aluminium strut bracket designed to take the fullers 20 cell strut bracket with a trailing rudder. This bracket is best suited for mono's, particularly offshore types, but could be used for hydros.

Price GBP 25.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.5 extra item 0.50, EU UKP 1.6 extra item 0.60, Elsewhere UKP 11 extra item 10.00
fullmdlbkt
for model boats, fullmdlbkt Fullers 7/12cell long strut bracket -2" long machined aluminium strut bracket suitable for the 7 or 12 cell struts.... NB the 20 cell strut will not fit.

Price GBP 11.00 Postage: base cost /additional item GBP  
Postage: UK UKP 1.1 extra item 0.10, EU UKP 1.65 extra item 0.15, Elsewhere UKP 2.3 extra item 0.30
fullmdsbkt
for model boats, fullmdsbkt Fullers 7/12cell short strut bracket - 7/8" long machined aluminium