WHich esc??

[Davem]

Hi I'm looking for an esc for a boat I'm building.

The motor I'm using is a Feigao 540 short 9, it's going to be built for mono 1, and it's a surface drive dateline storm hull, looking for some advice on which esc to have, not to fussed if it's got a BEC or not, looking to spend around £75

thanks for your help

dave

[astecme]

I'd suggest the Etti 90 as a minimum. You would probably also need the capacitor pack.

Allan

[Davem]

Cool, so the navy 90 with the capacitor bank in the shop section? Do I need to solder the capicator bank in? Or does it plug in somewhere? Sorry it's my first brushless boat

dave

[astecme]

You need to solder the cap bank in to the power leads.

[Davem]

Is there a diagram to show what I need to do? Or an ESC that I can get to avoide the extra capacitors?

Would the HOR sUppo 125 wr be ok?

[northern numpty]

Hi you could always use one of these

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8946&Product_Name=Turnigy_Marine_120A_Brushless_Boat_ESC
I used one in my mono1 all last season with no problems

Chris